Hot towel warmer cabinet with optional ozone +UV sterilizing | stainless steel | Hiden electric heating | heating moisturizing

Can you use radiofrequency and hifu on same treatment on same day or would they be separate?? If you can use at same time what is best procedure for this?

Dear Kristen, Thanks for your question. Basically, both of them are aimed for the same result, so we don't recommend you use both on the same treatment on the same day. But there is a treatment interval, for example, HIFU will need to be repeated 6 to 12 months apart after the initial treatment. Micro-needling RF interval could be 4 weeks, so you can do treatments based on the interval. For example, micro-needling treatment first, after 2 weeks of recovery, then HIFU treatment, and two weeks later, the second treatment of micro-needling RF, half a year, second HIFU treatment.

hi if i use 30 min of cavitation on each thigh everyday what will happen? can RF be used 30min everyday?

Hi Kek, Thanks for your question. Firstly, we don't recommend either cavitation or RF treatment every day. For the first month, three times a week or twice a week is suggested. Both Cavitation and RF. After that, you can reduce it to once a week for both of them. It only shows bad side effects if you used it every single day, it won't work like that way. Take it easy and keep a healthy behavior will help a lot

Hello. Can you mix this product with PRP.

Yes, you can do that. Basically, the aqua injection only contains Hyaluronic Acid, however, the doctor would mix Botox, Vitamin C, PRP (Platelet-rich plasma), etc to reach different expectations for different individual customers.

Can these be used on the Aquafacial hydro pro machine that is $590?

Yes, it fits

How do I purchase more of the anti-freeze masks?

Hi Jane, You can buy it at the below link: https://www.ibeautymachine.com/professional/anti-freeze-membranes-for-cryolipolysis-system.html If you want an anti-freeze membrane for Cryo C, then you should select the size 15*10cm.

Are the nano-needle tips made of silicone?

For this nano needle, it's made of surgical grade stainless steel 316. NOT silicone.

Is this machine FDA-approved? Thanks

No. it doesn't.

Once an area has been treated for 6 sessions, how long after the 6th session can that area be treated again?

Best results with 2-4 treatments up to 6 single treatments can be treated at an interval of about one week. Wait approximately four weeks between sessions

With this upgraded model having the focused cavitation, is the cavitation frequency still at 40kHz?

Hi Alana, Thanks for your question. Yes, it's still 40KHz as it's the most effective frequency.

What is the treatment protocol?

Selastin Exo Plus is a skin rejuvenation product used in aesthetic treatments to improve skin texture, elasticity, and overall appearance. It usually contains a mix of growth factors, peptides, and exosomes, which help promote skin regeneration and repair. Here’s a general treatment protocol for Selastin Exo Plus: Treatment Protocol Preparation: Cleanse the treatment area thoroughly to remove makeup, oils, and impurities. Disinfect the skin with an antiseptic solution, such as alcohol or chlorhexidine. Application Method: Microneedling: Apply the Selastin Exo Plus serum during or after microneedling. Use a microneedling device (usually 0.25mm to 1mm depth, depending on the area being treated). This method allows better absorption of the product through micro-channels created in the skin. Meso-Injection: Selastin Exo Plus can also be injected into the dermis using mesotherapy techniques. Microinjections are usually spaced 1–2 cm apart, ensuring even distribution across the treatment area. Topical Application: If used topically, it can be applied after laser treatments or chemical peels, as it helps calm the skin and enhances the healing process. Post-Care: After the treatment, apply a calming mask or post-treatment cream to reduce irritation and redness. Avoid sun exposure for a few days and apply broad-spectrum sunscreen regularly. Advise the patient to avoid using active ingredients like retinol or strong exfoliants for a few days post-treatment. Treatment Frequency: For optimal results, treatments are often performed in a series of 3 to 6 sessions, spaced 2 to 4 weeks apart, depending on the patient’s skin condition and goals. Aftercare: Instruct the patient to follow a simple skincare routine with gentle cleansers and moisturizers for the first 48 hours. Regularly apply SPF to protect the skin from sun damage. The specifics of the protocol may vary depending on the patient’s skin type, concerns, and the practitioner’s preferences.

if i purchase this from you, can i purchase additional bottles?

Hi there, yes, we can supply extra bottles. You'd better email support@ibeautymachine.com to purchase the extra bottles.

Is this machine restricted to only a specific Clientele (businesses etc.) or can anybody by this machine? I am interested in purchasing this machine for Personal use. Thank you

UltraSlim III| Ultrasonic cavitation with Vacuum RF facial and Body care System is one of the most professional and powerful aesthetic machine in the market combining 6 advanced technologies in one single system. It provides complete and advanced facial and body care treatment such as fat reduction, body shaping, cellulite reduction, skin tightening, wrinkle reduction, facial rejuvenation etc. It adopts 5th generation cavitation technology which provide comfortable and effective treatment with low noise. The advanced multipolar RF with Vacuum Body applicator is greatly effective for lymphatic drainage, skin tightening and lifting. Ultraslim III system is specially designed to provide accurate and effective treatment for all professional aestheticians and beauticians. BUT if you want to use it personal, that's also OK if you can afford that price

Can this be use for microneedling as glider ? Is it sterile? Thanks

Yes, it can be used for micro needling treatment. Each ampoule contains 2 ml solution, and yes, all of them are packed in sterile environment.

Hello, does this machine require the membranes to function properly? Also do you ship to Canada?

Dear Jody, Thanks for your inquiry. Yes, anti-freeze membranes are necessary for cryolipolysis coolsculpting treatment. Yes, we can ship to Canada without any problem, we use DHL for the shipment, it's a door to door service.

How deep does energy penetrate into the skin? If it depends on the energy range, then what is the range that it penetrates? What is the difference between between a RF of 1 MHz and 3MHz. I swear I read somewhere that 1MHz is actually better for the skin than 3MHz but I can't remember why.

Dear Kristina, The penetration depth depends on the frequency, not the energy level. The higher RF frequency, the shorter the penetration depth. So 1MHz will go deeper than 3MHz. It's hard to say which one is better if not mention the skin situation and which treatment you want. To be honest, there is no huge difference between 1MHz and 3MHz RF as the frequency is very close. I hope this may help you.

Hi, may I check how does this compare to the hydrafacial machine? Does it use the same hydro dermabrasion vortex tech? Can you send me the technical guide consisting of purpose and specification of this machine? I am interested.

Hi Hairic, Thanks for your inquiry. Yes, it's the similar technology. If you are looking for a hydra dermabrasion, we'd like to suggest you consider below model which is more suitable for you: https://www.ibeautymachine.com/professional/water-microdermabrasion-wet-microdermabrasion-skin-peeling-machine.html

How many mmHg on the vacuum?

The Max vacuum pressure is 100KPa

I want to clarify the frequency of treatments. A patient should have 4 treatments per week for 2 weeks, correct? Then they have only one treatment each week for 2 weeks, correct. A total of 10 treatments in 30 days. The other thing I want to clarify is about the exercise. 30 minutes of exercise should immediately follow this treatment, correct? Can the patient stand on a power plate for 30 minutes in place of exercise?

Hello Heather dawson, Thanks for your inquiry. Which machine do you mean? Or which treatment do you mean? I will give you a reply once get your confirmed reply. I think you were meaning the cavitation slimming treatment, but I am not sure about it, so your earliest response is highly appreciated. Best Regards,

What percentage of deoxycholic acid is in Aqualyx?

The ingredients are a polymer from 3, 6-Anhydro-L-Galactose and D-Galactose (0.5%), buffer systems (4.2%), sodium salt of (3α, 5α, 12α) - 3, 12-dihydroxy-5-cholan-24-acid (7.5%), water for injection purposes (87%) and sodium chloride (0.8%). The buffer system within AQUALYX ensures that the 12alfa-dihydroxy-5beta-24oico cholanic acid sodium salt is delivered to the target area.

what size of tubes this centrifuge takes, I read the holder are 15ml but it doesn't say what size of tubes will it hold I hope someone can help me.

It works on both 15ml and 8ml tubes, you can try to search PRP tubes on the website directly to find the tubes we have