Repair part-water valve

How many firings in each paddle before they need to be replaced? How much are the replacement paddles? Thanks. Jeff

hi jeff, the EMS paddles life span is 10000hours. for new paddles, the cost is 400USD/pcs.

Can I use this on the back of my hands? Which attachment?

Hi Lynn, Yes, you can use it for your hands. But you can only use the RF heads for it. Just find the proper size of RF heads if you want to use it for your hands.

On the front of the device, what do the 3 boxes with numbers display?

Hi Shenequa, Thanks for your question. It's the operation temperature, treatment time, and actual temperature for the head

Does the machine rotate to capture a full 180 image or does the patient need to turn their face to capture side views?

Yes, a 180-degree image is available, patients don't have to turn their faces during the whole procedure.

Are there any concerns for development of gradual hearing impairment, reversible or otherwise, as a result of the tinnitus sustained during cavitation?

As for the noise, if you mean the noise in the head (tinnitus soud),  although our cavitation technology has greatly reduced the sound level, it's very hard to completely reduce it because this is normal for all ultrasound with such low frequency. So we suggest you play some music in your salon or let the customer listen to music to distract their attention. Other suggestions to avoid tinnitus noise is as follows: 1, Don't touch the probe with water. If there is water on the probe during treatment, it will cause loud noise and also heat up very quickly. 2, Use pure ultrasound gel or high quality slimming gel. Please don't use too much gel. 3, Please don't set the energy too high. Reduce the energy below level 30 if patients feels uncomfortable. The lower the energy, the lower the noise. 4, Don't move the probe too quickly. Move it slowly. Place the probe firmly on the treated area. Avoid probe rubbing on the skin frequently.

How does CoolSculpting work?

A: This fat reduction technique works through a method called Cryolipolysis for the selective targeting and freezing of the fat cells in the treatment area. The procedure is performed using a small cooling device that is placed on the area to be treated for approximately 1-2 hours. After feeling some tightening and pressure on the treatment area initially, the area then becomes numb and nearly unnoticeable to the patient. Patients may work on their laptop, read, listen to music or even nap while the procedure takes place. The CoolSculpting system targets and freezes the fat cells in the area being treated, thereby, destroying the fat cells which are then absorbed and eliminated naturally through the body. There is no downtime and patients may return to their daily routine immediately, including work or their normal fitness routine.

Hi, I wanted to know if the iBeauty Pen MD Professional can fit a 36 pin needle tip, the pen I am asking about is the one on sale for $295 regular price $325. Thank you for your response. Victoria Sierra

The 36 Pin needle is for ibeautypen with 249USD, not for ibeautypen MD.

Hi , I have watched the video and downloaded the manual. Can I pls ask 1. Is it only one pass each time for the face? 2. It doesn't say in the manual or video what the recommended settings are for 1. Face 2 body? And which heads you use for where? Could you kindly let me know please? Also Is one treatment per week ok? Thank you so much. Very grateful for your answers.

Hi Christine, We sent the settings via email, pls check it.

Does the NCTF 135 HA, comes with the needles and syringes?

Hi Rocio, Thanks for your question. It comes with needles, but no syringes.

How much MHz does this device have?

It comes with 4MHz and 7MHz

can it remove white hair ?

no, it cannot

Hi I am wondering how many treatments are required for this machine and how far apart the treatments are from one another? Does it require a specific ultrasound gel or would you use just the regular gel you can get anywhere?

It shows visible result just after one treatment. The treatment interval should be at least 6 month. Normally one year is suggested. Yes, it needle cooling gel during treatment.

how large are the needle heads and how much are the replacement heads? thank you

Dear Tisa, Thanks for your question. We have 4 types of the heads. We will update the needle heads to our website, you can keep an eye on it. Or you can email us for a price quotation.

can this be microneedled?

Hi Umi, It's strongly suggested to inject via Syringe or mesotherapy injection machine. Micro needling is not suggested for this product.

Hello, what material is the pen made of ? Is it aluminium of stainless steel? thank you

Hi Jacynthe. Yes, it is made of aluminium stainless steel

Hi I am interested in buying Smart PRP low centrifuge price $355.00 does this machine takes tubes 15ml or 8ml and if possible could you send me the sku "here in your wed page" of tube I have to buy thank you.

It works on both 15ml and 8ml tubes, you can try to search PRP tubes on the website directly to find the tubes we have

The chart you sent with this machine says to do the facial tightening treatment 2 - 3 days per week, 8 - 10 sessions. Yet, on this description page it says just once every two weeks because of the way the epidermis grows. Which is it? What is the exact treatment plan for face and neck?

Hi Lynn, Thanks for your question. For the first month, two times a week or three times a week is suggested. After that, once a week. RF will not damage epidermis grows.

Is this product used during microneedling or after treatment?

Hi Denise, It's strongly recommended to use it during the treatment. After the treatment, you'd better use a EGF mask.

Hi, I am wanting to purchase the Endospheres but I'm just unsure what is the difference between the Smart and the Pro Thank you

Hi Laura, Thanks for your question. It's no big difference if just compare the technology and function. One is a desktop model, the other is a vertical model. That's the difference.

Can you use poly l lattice acid with Mesotherapy or Hyaluron pen? Are there any other ingredients besides poly l lactic acid in this? What is difference between fave and body formula

Hi Jodie, It's not recommended to use hyaluron pen. But if you have a mesotherapy gun or mesotherapy injector with precised needle length control, it can be used. There is not difference between the face and body except the volume