Description
Details
Features
- long aesthetic effect duration
- endotoxin level is below 0.1 EU/ml
- no residual BDDE
- CE certificate
- proven safety as demonstrated by the clinical safety assessment results
- even and smooth distribution of the gel during injection due to uniform particle size
- the series contains products varying in the gel particle size and HA cross-linking degree depending on the scope of use
Introduction
StarFill is a remarkable product that is used to fill in wrinkles and lines on the skin. The series contains 3 products StarFill Plus Lidocaine, StarFill Deep Plus Lidocaine and StarFill Implant Plus Lidocaine that differ in the scope, indications for use, and composition (the presence of lidocaine).
StarFill Implant Plus Lidocaine presents a dermal filler based on cross-linked hyaluronic acid (HA). Starfill fillers are obtained using the “Zero Endotoxin and BDDE Entire Process” (ZEEP) technology, which guarantees minimized endotoxin and residual BDDE levels. The efficacy of the product use was confirmed by the Wrinkle Severity Rating Scale (WSRS) survey results of the assessment of wrinkle improvement on week 8, 16, and 24 after the injection procedure. High HA cross-linking degree ensures longer effect duration compared to other HA-based filler analogues on the market, while outstanding viscoelasticity and cohesiveness guarantee uniform extrusion force during injection, which means smooth and even filler distribution. The presence of lidocaine in the composition makes the procedure painless.
What is in the box?
- 1 x 1.1ml , which contains 24mg of HA concentration and 0.3% lidocaine
- 2 needles(27G)
StarFill Dermal Filler Product Line
Exquisite Technology
1. Zeep(Zero Endotoxin & BDDE Entire Process)Technology
StarFill keeps endotoxin below 0.1EU/ml and no detection of residual BDDE minimizing various side effects that may occur after the procedure.
2. Downing process
StarFill produces a uniform particle size through its own Downing Process.
Exquisite procedures are possible without agglomeration through optimized injection pressure.
Exquisite Technology
1. Minimized BDDE Input
Mod(Degree of Modification) is a safety verification requirement.
Mod= full cross-Linked BDDE+Pendant type BDDE by checking the modification ration of HA through measurement of total amount of BDDE present in HA Gel.
Mos of StarFill is 1/6 lower than other mono type filler, which makes it safer.
2. Maximization of Cross-linking Efficiency
StarFill through the improved physical cross-link process to achieve a complete cross-linking level while minizine the amount of BDDE as a chemical catalyst material, thereby manufacturing a gel with high viscoelastic properties.
3. High Viscoelasticity and Cohesiveness
Compared with StarFill Implant Plus and representative filler products, StarFill complex viscosity and cohesiveness is equivalent to foreign A products which has more BDDE inut and more outstanding compare with domestic B products, can make best clinical results.
Exquisite Molding
1. Minimized BDDE Input
Mod(Degree of Modification) is a safety verification requirement.
Mod= full cross-Linked BDDE+Pendant type BDDE by checking the modification ration of HA through measurement of total amount of BDDE present in HA Gel.
Mos of StarFill is 1/6 lower than other mono type filler, which makes it safer.
2. Maximization of Cross-linking Efficiency
StarFill through the improved physical cross-link process to achieve a complete cross-linking level while minizine the amount of BDDE as a chemical catalyst material, thereby manufacturing a gel with high viscoelastic properties.
3. high viscoelasticity and Cohesiveness
Compared with StarFill Implant Plus and representative filler products, StarFill complex viscosity and cohesiveness is equivalent to foreign A products which has more BDDE inut and more outstanding compare with domestic B products, can make best clinical results.
Application
StarFill Implant Plus Lidocaine is ideal for correction of severe lines and facial volumization. The filler is used for lower subcutaneous and supraperiosteal injections.
-
facial volumization (forehead, temples, malars, lower eyelid, chin, preauricular area and jaw)
- reduction of deep wrinkles and folds (nasolabial folds, forehead wrinkles, frown lines, perioral wrinkles and chin wrinkles)
- nazal bridge / ridge upgrade
The aesthetic effect lasts from 12 to 18 months. The composition and structure of the substance are responsible for its long duration of action.
Contraindicated
The product has contraindications. We are not responsible for any negative effects that you may encounter after administering products by yourself. Consulting a doctor or medical professional is recommended prior to any procedure.
Replengen Dermal Filler must not be used in:
- Women who are pregnant or breastfeeding
- People under age of 18
- Patients who are known to demonstrate hypersensitivity to hyaluronic acid.
- Patients who are known to demonstrate hypersensitivity to lidocaine
- Patients who tend to develop hypertrophic scarring.
- Immediately before or post laser therapy, chemical peeling or derma-brasion.
- Areas presenting cutaneous inflammation or signs of infection.
Side Effects
Some redness, mild swelling, and discomfort may occur at the site of injection.
Storage / Shelf Life
2~25°C / 24 months from the date of manufacture
Specification
Specification
Package List | 1 x 1.1 ml prefilled syringe 2 needle (27G) HA concentration: 24 mg/mL Lidocaine: 0.3% Duration: 12 to 18 months |
---|
Shipping&Payment
Shipping
Delivery country: currently we only deliver to the USA, Canada, Australia, the UK, New Zealand. EU, Japan, South Korea, Singapore, China, Malaysia and Vietnam.
Importation duty: iBeautyMachine.com covers importation duty.
Excludes: special items such as gas or liquid.
Remote regions may cause extra for delivery to the door.
Please refresh the checkout page if you change the cart in case the free shipping option doesn't show up.
NOTE:
Warehouse working time: 9:00 am~ 6:pm (Monday to Friday; GMT+8).
Payment
Please note: We DO NOT accept Credit Card payments for product value of a single unit over 1,500 USD.
If you are not happy with the order and the product, you can ask for a refund after receiving the package. Our customer support will assist you with it.
We do not add taxes, VAT, or any other hidden charges. You pay us what you see on your invoice, for example, Goods Subtotal + Shipping Costs (does not include duties). Please find out as much as you can about import taxes in your own country before purchasing an item. In special cases, you may need to pay import duties on certain goods. You can contact us for further assistance on any of this.